Lead and zinc work in Alkmaar
Most roof leaks do not start in the middle of the roof surface but at the junctions. The lead flashing around the chimney, the zinc valley gutter where two roof surfaces meet, and the finishing along the roof edge. That is exactly what lead and zinc work is all about, and it is the trade where experience matters the most.
Lead and zinc work in Alkmaar? Lead flashing, valley gutters, and zinc finishing, soldered instead of sealed.
- Lead flashing, valley gutters and roof edges
- Zinc soldered, not sealed
- 12-year warranty on workmanship and materials
Why leadwork makes the difference
Lead and zinc are found where materials meet: roof against chimney, roof surface against roof surface, tiles against dormer. It is precisely there that everything interacts due to heat and cold, and that is where the first crack appears after twenty years. Anyone who seals such a crack with sealant buys a year or two. Anyone who replaces the lead and installs it correctly will be set for decades.
The same principle applies to zinc. A soldered seam is a connection that lasts as long as the material itself; a sealed seam is just a band-aid. That is why we solder, even though it takes more time. Zinc that is properly set in lasts sixty to eighty years, and that is a different calculation than a repair that needs to be done every few years.
To perfect lead and zinc work in 3 steps
View our working method
Step 01
Inspection
We examine all connections and look for where things are really going wrong.
Step 02
Quote
You receive a fixed price for the connections that require attention.
Step 03
Repair and delivery
We renew the lead or zinc work and deliver with a warranty.
A bit worn leadwork causes
Don't wait
Connections fail slowly and invisibly. This is what happens in the meantime.
Water drains away
A lead flashing that is no longer sealed directs water into the wall instead of over it.
Rot in roof structure
Moisture at a valley gutter reaches the roof boarding and the rafters underneath.
Damaged chimney
Water that seeps into the masonry freezes and cracks in the winter.
Sealant repairs are piling up
Every layer of sealant makes the final repair more expensive, because it all has to be removed again.
The leak keeps coming back
As long as the connection is incorrect, any repair underneath it is temporary.
Leak at the chimney?
Then the problem is usually in the leadwork. We will come and take a look for free.
We work with premium brands
We work exclusively with proven quality brands, so that your roof lasts for years without any worries.
What does it cost zinc work in Alkmaar?
Clear pricing
The price depends on the number of linear meters, accessibility, and whether it involves lead, zinc, or copper. The number of corners and connections also counts, as that is where most of the work is involved. Therefore, we do not quote a price per meter over the phone. You will receive a fixed price after the free inspection.
When is leadwork due for replacement?
Good to know
Lead that bulges or detaches from the wall, white efflorescence on zinc, small holes in a valley gutter, or sealant edges applied to mask a problem. Also damp patches on the interior wall at the level of the chimney are a classic signal. Lead lasts thirty to fifty years on average, so for an older house, it is a logical point of inspection.
Everything about leadwork in Alkmaar
More questions? Contact us
Questions about lead and zinc work in Alkmaar? You will find the answers below.
In most cases, yes. The lead flashing around a chimney is one of the most common causes of roof leak. We check that first before we search further.
Sometimes, but usually replacement is wiser. Lead that is warping or coming loose is at the end of its lifespan, and a repair will last it at most a few years.
Because a soldered seam lasts just as long as the zinc itself, whereas a sealed seam does not. Sealant is a solution for an emergency situation, not a permanent connection.
Zinc lasts sixty to eighty years, provided it is properly worked in and water does not remain in it. Lead lasts around thirty to fifty years.
Do you have a question that is not listed here?
Contact us or call us
What do our say customers
Google reviews
What comes up most often: that the cause is thoroughly investigated, that everything is explained calmly, and that the roof is left clean and tidy.
RatingPleasant and efficient roofer who immediately replaced the worn-out lead flashing at the chimney.
We had two skylights replaced with larger ones and renewed the gutters on that side at the same time. The team worked for three days, and the result is exactly what we had in mind. We already notice a difference in the amount of natural light, and the gutters slope perfectly.
Our skylight no longer closed properly and moisture was coming in when it rained. They repaired it expertly and immediately replaced the seal all around.
Doubts about the connections on your roof?
Request a free inspection. We will examine all lead flashing, valley gutters, and roof edges, so you know exactly which ones need attention.
- Free inspection
- Soldered, not sealed
- VCA certified
- 12-year warranty
